RIoT Board features

Kit Features


The RIoTboard is based on the i.MX 6Solo processor from Freescale Semiconductor integrating all the functionalities of this multimedia application processor with the following features:

    Processor
        ARM Cortex A9 MPCore™ Processor at 1 GHz
        High-performing video processing unit which covers SD-level and HD-levelvideo decoders and SD-level encoders as a multi-standard video codec engine
        An OpenGL® ES 2.0 3D graphics accelerator with a shader and a 2D graphics accelerator for superior 3D, 2D, and user interface acceleration
    Memories
        1GByte of 32-bit wide DDR3 @ 800MHz
        4GB eMMC
    Media Interfaces
        Analog headphone/microphone, 3.5mm audio jack
        LVDS interface
        HDMI interface
        Parallel RGB interface
        Camera interface (Support CCD or CMOS camera)
        MIPI lanes at 1 Gbps
    Data Transfer Interfaces
        Debug Ports: 3 pin TTL level
        Serial Ports:
            UART2, 3 line serial port, RS232 Logic
            UART3,4,5, 3 line serial port, RS232 Logic (Expansion port)
        USB Ports:
            1 x USB2.0 OTG, mini USB, high-speed, 480Mbps
            4 x USB2.0 HOST, Type A, high-speed, 480Mbps
        uSD card interface
        SD card interface
        10M/100M/Gb Ethernet Interface (RJ45 jack)
        2 channel I2C interface (Expansion port)
        2 channel SPI interface (Expansion port)
        3 channel PWM interface (Expansion port)
        GPIO (Expansion port)
    Input Interfaces
        10-pin JTAG interface
        Boot configuration interface
    Others
        1 Power LED
        1 Open SDA LED
        2 User-defined LEDs
        1 DC Jack
        1 Reset button